ESCO occupation

Gear machinist

Gear machinists make precision parts for gears and other driving elements.

U.S. median pay for the matching O*NET occupation
$65,670 a year
Projected U.S. jobs
+5.9% by 2035

For Computer Numerically Controlled Tool Programmers (51-9162.00), from the ESCO–O*NET crosswalk. BLS, May 2024 national estimates. Details and sources

Top skills: consult technical resources, mechanics, monitor automated machines, perform test run, remove processed workpiece

Hiring for this role? Map this role in your org chart, free →

Job Zone 2 — Some Preparation NeededHolland code CRI34 skills on file

Compare with another occupationCompare with Laser cutting machine operator

Duties and responsibilities

From the occupation's description in ESCO, the European classification:

  • They use a variety of machine tools.

Tasks O*NET records for Computer Numerically Controlled Tool Programmers (51-9162.00), this occupation's close match in the official ESCO–O*NET crosswalk:

  • Determine the sequence of machine operations, and select the proper cutting tools needed to machine workpieces into the desired shapes.
  • Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data to calculate dimensions, tool selection, machine speeds, and feed rates.
  • Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications.
  • Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
  • Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
  • Revise programs or tapes to eliminate errors, and retest programs to check that problems have been solved.

All 16 tasks for Computer Numerically Controlled Tool Programmers

U.S. pay and outlook for the matching O*NET occupation

ESCO publishes no pay. These are U.S. figures for Computer Numerically Controlled Tool Programmers (51-9162.00), this occupation's exact or close match in the official ESCO–O*NET crosswalk. Pay in Europe differs.

Median annual wage (U.S.)
$65,670
Employment (U.S.)
28,230
Projected employment change, 2025–2035
+5.9%, faster than the 3.5% for all occupations

Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2024 national estimates and Employment Projections 2025–2035, for SOC 51-9162 (Computer Numerically Controlled Tool Programmers). Pay varies by location, employer and experience.

Job Zone

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Zone 2: Some Preparation Needed

Some preparation. Usually a high school diploma, some previous work-related skill or experience, and a few months to a year of training with experienced workers.

Job Zone is O*NET's rating of how much education, experience and training an occupation typically needs — a property of the work, not of anyone doing it.

Occupational interest profile

CRIConventional · Realistic · Investigative — the three strongest interests, in order

  • C Conventional5.92
  • R Realistic4.88
  • I Investigative3.62
  • E Enterprising1.68
  • A Artistic1.53
  • S Social1.45

RIASEC (Holland) interests on O*NET's 0–7 scale: what the work draws on, not what any individual prefers. Hover a row for what each dimension means.

Job Zone and interest data are borrowed from Computer Numerically Controlled Tool Programmers (51-9162.00): in the official ESCO–O*NET crosswalk, its close O*NET match, and the best-ranked match that has them. ESCO doesn't publish them directly.

Related ASVAB line scores

The work leans most on the content of the Army CL (Clerical), GT (General Technical), FA (Field Artillery) line scores.

Based on the O*NET profile of Computer Numerically Controlled Tool Programmers, this occupation's O*NET match.

Line scoreASVAB areasRelevance (1–5)
CL (Clerical)VE + AR + MK3.5
GT (General Technical)VE + AR3.5
FA (Field Artillery)AR + MK + MC3.4
CO (Combat)AR + AS + MC3.2
SC (Surveillance and Communications)VE + AR + AS + MC3.2

How this is worked out: Each ASVAB area the Army composites add up is tied to the O*NET abilities and knowledge areas that cover the same content. An area scores the average O*NET importance (1 to 5) of those ratings for this occupation, and a line score scores the average of its areas. Line scores at O*NET’s “important” level (3) or higher, at most three, are listed as related.

This shows which tested content the civilian work draws on. It is not a qualification standard and implies no score requirement; military jobs set their own, and they change. Confirm with a recruiter.

2030 skills profile

What this is

How much this occupation leans on each of the 13 core skills the World Economic Forum's Future of Jobs Report 2025 expects to grow by 2030, from 0 to 100, read from its O*NET ratings (through its closest O*NET occupation, Computer Numerically Controlled Tool Programmers). It describes the occupation, not any person in it.

2030 skills profile of Computer Numerically Controlled Tool Programmers, scores out of 100, highest first
SkillBarScore
Motivation and self-awareness (proxy)65
AI and big data63
Technological literacy61
Creative thinking53
Curiosity and lifelong learning53
Resilience, flexibility and agility (proxy)53
Systems thinking52
Analytical thinking50
Empathy and active listening43
Leadership and social influence38
Resource management and operations30
Service orientation and customer service29
Talent management29
How each score is built
  • AI and big data: Programming 3.8, Mathematics 3.1, Mathematical Reasoning 3.5, Analyzing Data or Information 3.3, Computers and Electronics 3.8
  • Technological literacy: Working with Computers 4.8, Computers and Electronics 3.8, Technology Design 2.1, Troubleshooting 3.0
  • Curiosity and lifelong learning: Active Learning 2.9, Learning Strategies 2.6, Updating and Using Relevant Knowledge 3.8
  • Creative thinking: Originality 2.8, Fluency of Ideas 2.9, Thinking Creatively 3.7
  • Talent management: Management of Personnel Resources 2.1, Coaching and Developing Others 2.7, Staffing Organizational Units 1.3, Developing and Building Teams 2.5, Personnel and Human Resources 2.1
  • Systems thinking: Systems Analysis 3.1, Systems Evaluation 3.0, Complex Problem Solving 3.1
  • Motivation and self-awareness: Monitoring 3.5, Time Management 3.0, Determine Tasks, Priorities and Goals 4.0, Freedom to Make Decisions 3.9
  • Resilience, flexibility and agility: Category Flexibility 3.1, Time Pressure 4.2, Conflict Situations 2.6, Dealing With Unpleasant, Angry, or Discourteous People 2.5
  • Leadership and social influence: Persuasion 2.0, Coordination 2.8, Guiding, Directing, and Motivating Subordinates 2.4, Selling or Influencing Others 2.0, Coordinate or Lead Others in Accomplishing Work Activities 3.3
  • Analytical thinking: Critical Thinking 3.0, Judgment and Decision Making 3.0, Deductive Reasoning 3.0, Inductive Reasoning 3.0
  • Empathy and active listening: Active Listening 3.0, Social Perceptiveness 2.6, Assisting and Caring for Others 2.6
  • Service orientation and customer service: Service Orientation 2.0, Customer and Personal Service 2.5, Performing for or Working Directly with the Public 2.0, Deal With External Customers or the Public in General 2.2
  • Resource management and operations: Management of Financial Resources 1.8, Management of Material Resources 1.8, Operations Analysis 2.9, Monitoring and Controlling Resources 2.3

Each rating is O*NET's 1 to 5 importance or work context value, put on 0 to 100 and averaged. Read the method and its limits, or profile a whole team.

O*NET equivalents

From the official ESCO–O*NET crosswalk, strongest match first. A broader occupation takes in this one; a narrower one is a part of it.

Closest occupations

Compare any occupation →

ESCO occupations that share the most of this occupation's 11 essential skills. A plain count, not a hidden score.

Use this in your own job architecture

BlissPoint Organization Viewer can link a role directly to this occupation and suggest these skills as that role's starting requirements.

Try it free →

Questions

What does a gear machinist do?
Gear machinists make precision parts for gears and other driving elements. Top skills: consult technical resources, mechanics, monitor automated machines, perform test run, remove processed workpiece.
How much does a gear machinist make?
In the U.S., the closest U.S. occupation, Computer Numerically Controlled Tool Programmers, pays a median of $65,670 a year (BLS, May 2024 national estimates). Projected jobs: +5.9% by 2035.
How do you become a gear machinist?
Some preparation. Usually a high school diploma, some previous work-related skill or experience, and a few months to a year of training with experienced workers.

This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license; O*NET® is a trademark of USDOL/ETA. ESCO occupations and skills are from the European Commission's ESCO classification, and the occupation crosswalk is the official ESCO–O*NET mapping by the ESCO Secretariat with USDOL/ETA. This service uses the ESCO classification of the European Commission. BlissPoint Analytics has modified all or some of this information: skill, task and descriptor ratings are rounded to one decimal, and ESCO occupations show Job Zone and interests copied from a crosswalked O*NET occupation. USDOL/ETA has not approved, endorsed, or tested these modifications.